Nylobrade® - Clear, Braid Reinforced Hose

Nylobrade PVC Hose

Made in USA

Physical Properties**

Hardness, Shore A ±5 80
Tensile Strength, psi 2500
Elongation at Break, % 300
Brittle Temperature, °F -50
Max. Operating Temperature, °F 175
Max. Operating Temp. for NSF, °F 140

**Values listed are typical for the material used in manufacture, except where noted, and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application.

Recommended Fittings and Clamps

  • Thermobarb® plastic barbed fittings
  • Stainless steel barbed fittings
  • Oetiker® ear type clamps
  • Kwik Clamp™ nylon double bond hose clamps
  • Worm gear clamps

 

DEHP freeNSF listed

SPECIFICATIONS
NYLOBRADE - CLEAR BRAID REINFORCED HOSE

Product Number ID  OD  Wall  Wall Type  Available Lengths  Working PSI (at 70°F)  Weight (lbs/100 ft) 
1000076 1/8 0.315 0.095 Standard  100 465 3.00
1000230 3/16 0.394 0.103 Standard  100, 500 315 5.06
1000307 1/4 0.453 0.102 Standard  100 300 6.03
1000461 5/16 17/32 0.094 Standard  100 280 7.77
1000538 3/8 0.6 0.113 Standard  100, 500 230 9.26
1000692 1/2 0.728 0.114 Standard  100, 500 215 11.82
1000846 5/8 29/32 0.141 Standard  100, 300 200 18.17
1000923 3/4 1.024 0.137 Standard  100, 300, 500 150 20.53
1001154 1 1.299 0.15 Standard  100 130 29.03
1001308 1-1/4 1.732 0.241 Standard  100 110 60.70
1001385 1-1/2 1.929 0.215 Standard  100 70 62.12
1001462 2 2-1/2 1/4 Standard  100 50 95.02
1020005 1 1-3/8 3/16 High Pressure  100 185 37.80
1020012 1-1/4 1.732 0.241 High Pressure  100 150 60.70
1020019 1-1/2 1.95 0.225 High Pressure  100 90 65.50
1020026 2 2-1/2 1/4 High Pressure  100 133 95.02
1020061 1/4 1/2 1/8 High Pressure  100 400 7.90
1020075 3/8 5/8 1/8 High Pressure  50, 100 265 10.50
1020096 1/2 0.85 0.175 High Pressure  100 258 20.00
1020117 3/4 1-1/8 3/16 High Pressure  100 233 30.00
1030309 1/4 0.435 0.093 Thin  100 316 5.35
1030540 3/8 0.575 0.1 Thin  100 215 8.02
1030694 1/2 0.71 0.105 Thin  100 191 10.73

Add length suffix to part number when ordering. Example: 100 ft. of 1/8" I.D. x .315" O.D. is part number 100 0076-100.
Working pressures are calculated from burst testing using a 3:1 safety factor. Application testing is recommended.
ID is the critical dimension for fittings application.

The data listed throughout this web site is meant only as a guide to aid in design, and is believed to be reliable; however, nothing stated shall constitute a guarantee or warranty for any application. Product field-testing should be performed to find the actual values for a specific application.

Specifications are subject to change without notice.

 

Notes

Clear NYLOBRADE is made from non-toxic ingredients selected from those sanctioned by the Food and Drug Administration (FDA) for use in food contact applications. Its NSF certification makes NYLOBRADE a good choice for drinking water applications, those involving water at temperatures up to 60°C (140°F), and food processing applications.

NYLOBRADE is generally unaffected by most oxidizing and reducing agents. Diluted acids and alkalies have little effect, though if highly concentrated tend to make the hose less pliable. If chemical resistance is in question, in-plant tests are suggested.

Gasoline and oils will harden NYLOBRADE over periods of intermittent use. In these applications, continuous use will slow the hardening process.

^NYLOBRADE HP (High Pressure) sizes 3/8" I.D. and up have a tighter braid pattern and, therefore, reduce the visual flow contact and increase the hose's resistance to bending & flexing. Heavier walls on similar I.D.s will be more resistant to kinking.

 

| Home | Products | News & Events | About Us | Literature | Contact Us |
| Legal Notices & Trademarks | Terms & Conditions of Sale | Privacy Policy |