Silbrade® - Braid Reinforced Silicone Hose

silicone hose

Made in USA

Physical Properties**

Hardness, Shore A ±5 - Liner 70
Hardness, Shore A ±5 - Cover 60
Tensile Strength, psi 1000
Elongation at Break, % 350
Brittle Temperature -80°F
Max. Operating Temperature 350°F

**Values listed are typical and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for the application.


Recommended Fittings and Clamps

  • Thermobarb® plastic barbed fittings
  • Stainless steel barbed fittings
  • Oetiker® ear type clamps
  • Kwik Clamp™ nylon double bond hose clamps
  • Worm gear clamps

 

 

ADI Free NSF listed

SPECIFICATIONS
SILBRADE BRAID REINFORCED SILICONE HOSE

Product
Number
I.D.
(IN.)
O.D.
(IN.)
Wall
(IN.)
Available
Lengths 
Working PSI
(at 70°F) 
Burst PSI
(at 70°F)*
Weight
(lbs/100 ft) 
2900072 1/8 0.365 0.12 100 233 699 5
2900149 3/16 0.447 0.13 100 216 648 7
2900226 1/4 0.52 0.135 100 208 624 9
2900303 5/16 0.592 0.14 100 183 549 11
2900380 3/8 0.655 0.14 100 166 498 13
2900457 1/2 0.8 0.15 100 141 423 17
2900534 5/8 0.965 0.17 50 116 348 23
2900611 3/4 1.1 0.175 50 91 273 28
2900765 1 1.38 0.18 50 75 225 36
Cut coils are available; charges do apply -- call for details.
Add length suffix to part number when ordering.
Example: 100 ft. of 1/8" I.D. x .365" O.D. tubing is part number 290 0072-100.
*The burst pressure can be expected to decrease by at least 20% for each 200°F increase up to 350°F.
ID is the critical dimension for fittings application.

 

Notes

The construction of SILBRADE enables silicone tubing to handle increased pressure applications. SILBRADE offers outstanding resistance to temperature extremes and is made from FDA-sanctioned ingredients.

The flexible design and construction of SILBRADE allows excellent bend radii and permits installation in restricted spaces without impeding flow.

SILBRADE, a peroxide-cured product, contains no sulphur or other acid-producing chemicals thereby eliminating the possibility of staining, corroding, or deteriorating other materials it contacts. It is also resistant to ozone and U.V. over long time periods.

Care is recommended in the selection of fittings and clamps, as sharp barbed fittings or unlined metal clamps could tear into the hose wall and possibly cause a failure, especially at elevated pressures.

SILBRADE is not recommended for implantable or in-body uses or for continuous steam applications.

^SILBRADE may be low pressure steam sterilized in-line or autoclaved at up to 250°F in a normal autoclaving cycle. However, if exposed to repeated steam sterilization or long-term high temperature or pressure, silicone will eventually relax and become gummy. It should then be replaced.

SILBRADE is not recommended for implantable or in-body uses or for continuous steam applications.


| Home | Products | News & Events | About Us | Literature | Contact Us |
| Legal Notices & Trademarks | Terms & Conditions of Sale | Privacy Policy |