NewAge Food and Beverage Hose and Tubing
Phone: 1-800-506-3924 (toll free US only)
Phone: 1-215-526-2300 (worldwide)
Email: info@newageindustries.com
Food & Dairy Beverage Grade Nitrile Hose
for Suction & Discharge Applications
Notes
| Construction | |
| Liner: | White FDA Nitrile rubber |
| Reinforcement: | Multiple plies of polyester with helix wire |
| Wire: | Steel helix |
| Cover: | Gray Nitrile rubber |
Fitting Styles Available
-
Tri-Clamp®
-
Male Cam & Groove
-
Female Cam
-
Collars
-
Hinge Clamps
All recommended fittings, collars, hinge clamps and accessories are made from 300 series stainless steel.
Physical Properties**
| Minimum Operating Temp., °F |
-40 |
| Maximum Oprating Temp., °F |
210 |
| Working Pressure at 70 °F (21.1°C) |
150psi |
| Max Burst Pressure at 70 °F (21.1°C) |
600psi |
**Values listed are typical for the material used in manufacture, except where noted, and are meant only as a guide to aid in design. Field testing should be per- formed to find the actual values for your application.
- Ultra smooth, white, nitrile rubber inner surface offers high purity and allows unrestricted flow, minimizing entrapment and blockage concerns
- Microbe-resistant liner is built on stainless steel mandrels for cleanliness and will not impart taste or odor.
- Meets FDA, USDA and Canadian Food Inspection Agency (file: N267) standards
Nitrile compound used is free of animal-derived ingredients- More flexible than other rubber food and beverage hoses of similar construction
- Abrasion-resistant nitrile compound cover is lightweight yet durable
- Multi-layered and reinforced with a wire helix, making it ideal for suction applications or discharge applications such as tank cleaning
- Rated for full vacuum (29.9 in./Hg.)
- Odorless and tasteless, making it suitable for a wide variety of food and beverage applications including potable water, non-alcoholic beverages, juices, oily/fatty or dry bulk foods, milk, and dairy products
- Available in bulk quantities or as complete hose assemblies
- Offered in a range of popular sizes
- Clean In Place to 248°F (120°C). Not intended for continuous steam service.
- Offered with standard BPE Stainless Steel Tri-Clamps®, male and female cams, fittings, collars and clamps
SPECIFICATIONS |
|||||
| PART NUMBER |
I.D. (IN.) |
O.D. (IN.) |
VACUUM RATING (IN./Hg.) |
BEND RADIUS (IN.) |
LBS. PER FT. |
| NAFB-NW-1000 | 1 | 1.54 | 29.9 | 4 | 0.68 |
| NAFB-NW-1500 | 1.5 | 2.04 | 29.9 | 6 | 0.98 |
| NAFB-NW-2000 | 2 | 2.54 | 29.9 | 8 | 1.26 |
| NAFB-NW-2500 | 2.5 | 3.13 | 29.9 | 9 | 1.76 |
| NAFB-NW-3000 | 3 | 3.60 | 29.9 | 12 | 2.06 |
| NAFB-NW-4000 | 4 | 4.60 | 29.9 | 16 | 2.73 |
NOTE: Hose may be ordered in bulk or as hose assemblies. Maximum continuous length is 100 ft. Specify length (per foot) when ordering. The data listed throughout this web site is meant only as a guide to aid in design, and is believed to be reliable; however, nothing stated shall constitute a guarantee or warranty for any application. Product field-testing should be performed to find the actual values for a specific application. Specifications are subject to change without notice. |
|||||
RECOMMENDED FITTINGS & CLAMPS |
|||||||||||||||||||||||||||||||||
| FITTINGS FOR NAFB-NW-1000 - 1" I.D. NITRILE HOSE | FITTINGS FOR NAFB-NW-1500 - 1-1/2" I.D. NITRILE HOSE | ||||||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||||||
| FITTINGS FOR NAFB-NW-2000- 2" I.D. NITRILE HOSE | FITTINGS FOR NAFB-NW-2500- 2-1/2" I.D. NITRILE HOSE | ||||||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||||||
| FITTINGS FOR NAFB-NW-3000- 3" I.D. NITRILE HOSE | FITTINGS FOR NAFB-NW-4000- 4" I.D. NITRILE HOSE | ||||||||||||||||||||||||||||||||
|
|